Keep your gear in top condition

Keeping your gear in tip-top order needn’t be difficult, especially when it comes to cleaning drum shells. Here we’ll show you how to get your drums looking good as new. Start by removing the tension rods and then lift away the hoop, along with the drum head. Next, remove the lugs (and any other hardware) by loosing the fixings from the inside of the drum. Stripping the shell of its lugs is not essential but is ultimately worth the time to ensure even results.

Removing the badges can be a real pain so it’s often a much easier option to just cover them up instead.  After concealing them with masking tape, very carefully cut around the outline with a sharp blade avoiding direct contact with the shell. This will protect the badge from any cleaning agents used.

For newer or cleaner kits, a good buffing with a soft cloth can be all that is necessary. Be gentle on them at first as it can be really easy to scratch the finish with any dirt that has built up. A lot of drum techs favour using nappies as cloths because they are designed to be so soft.

Depending on how well the shells come up after a good rub down, you may decide to get some cleaning agents or polishes involved. Glass cleaners or T-Cut can be used to restore dull lacquer or wrap finishes while car wax or furniture polish will create a high-shine finish.

Once you are satisfied with your newly gleaming shells, simply reattach the lugs, remove the masking tape and replace the hoops. You may decide to give the hardware a good clean as well before putting everything back together.